Hines Bending Systems is the #1 worldwide manufacturer of tube benders, pipe benders and induction benders. 

THE 100 CNC-B TUBE BENDER CHURNS OUT HIGH QUALITY, MULTIPLE BENDS FOR MANY DIVERSE INDUSTRIES.

If you need a CNC bender that can produce multiple bends on a single tube or pipe, then the 100 CNC-B bender fits the bill. The 100 CNC-B bender has earned high marks from large firms that have complex bending needs. Its ability to churn out high quality, multiple bends means you will be able to produce a wide range of products for many diverse industries.

Regularly, the 100 CNC-B bender the need for two regular bending machines. Our CNC benders‘ efficiency is spectacular.

In any economy or budget, this machine will keep you bending for years with every feature you will need to do the jobs that come your way.

100 CNC-B Tube Bender Applications
The 100 CNC-B bender is employed extensively in the food and beverage, fuel lines and appliance industries. NASA uses a CNC tube bender at its White Sands training facility.

FEATURES OF THE 100 CNC-B TUBE BENDER

• Simple input of machine parameters, DOB, DBB, POB (PLC-FX3U

  series Mitsubishi)

• Memory capacity: Unlimited

• Operational modes: jog, step and auto

• Self diagnosis: displays of fault source and remedies

• Identification of single bend from multi-bend part.

• Self option carriage use

• Safety auto prevention from bending operation when

  last end section is too short

• Speed levels of DOB, DBB, and POB: 16 variable settings

• Repeatability precision: DOB/POB: 0.1deg; DBB: 0.1mm

• Resolution: DOB/POB: 0.1deg; DBB: 0.1mm

• Parameter preset resolution: DOB/POB: 0.1deg; DBB: 0.1mm

• Northman Directional Valves

• Preset of processing, i.e., with mandrel or without mandrel,

  auto mandrel lubrication, speed levels of DOB, DBB, and

  POB / Servo System – Series A, National (Japan)

STANDARD

• Pressure Die Holder

• Wiper Die Holder

• Overhead Tie Bar (Eliminates Die Deflection)

• Pressure Die Assist

• Servo Carriage Boost

• Panasonic Servo Motors

• Mandrel Lubricator

• Mandrel Extractor

• Mandrel Early Out Programmable

• BendPro G2 Control

• Clockwise Rotation

ADDITIONAL SPECIFICATIONS FOR THE 100 CNC-B

• Capacity: 1.375″ OD x .120 Wall

• Maximum Feeding: 160ft/min

• Maximum POB: 50r/min

• Standard Maximum Radius: 5 inch

• Maximum Bend Angle: 190 degrees

• Operating Pressure: 1200psi

• Reservoir Capacity: 80 U.S. Gallons

• Approximate Weight: 5500lbs

• Approximate Dimensions: 10′ L x 3′ W x 4.5′ H

• Voltage: 220 volt/3 Phase/60Hz; 50Hz Optional

• Bend angle accuracy +/-: 0.1 degree

• Bend arm speed: 10rpm

• Maximum tube length over mandrel: 6 ft

• Motor: 5HP

If you need a tube bender to meet many production needs, then the 150 CNC-B bender should be on your required list. The 150 CNC-B bender was designed to produce bends up to 1.5” O.D. by .125 Wall, the most common of pipe and tube ranges. The 150 CNC-B’s ability to fulfill a variety of customer tube bending requirements means you should be able to not only recoup your investment quickly, but also expand sales and revenue.

Universally, the 150 CNC-B bender is recognized as a “must-have” for all your manufacturing needs.

150 CNC-B Tube Bender Applications
The 150 CNC-B bender is used throughout all manufacturing industries as its uses are virtually unlimited.

If you need a machine or tooling quoted let us know. Hines can provide the tooling you need. 

FEATURES OF THE 150 CNC-B TUBE BENDER

• Simple input of machine parameters, DOB, DBB, POB (PLC-FX3U
  series Mitsubishi)
• Memory capacity: Unlimited
• Operational modes: jog, step and auto
• Self diagnosis: displays of fault source and remedies
• Identification of single bend from multi-bend part.
• Self option carriage use
• Safety auto prevention from bending operation when
  last end section is too short
• Speed levels of DOB, DBB, and POB: 16 variable settings
• Repeatability precision: DOB/POB: 0.1deg; DBB: 0.1mm
• Resolution: DOB/POB: 0.1deg; DBB: 0.1mm
• Parameter preset resolution: DOB/POB: 0.1deg; DBB: 0.1mm
• Northman Directional Valves
• Preset of processing, i.e., with mandrel or without mandrel,
  auto mandrel lubrication, speed levels of DOB, DBB, and
  POB / Servo System – Series A, National (Japan)

STANDARD

• Pressure Die Holder
• Wiper Die Holder
• Overhead Tie Bar (Eliminates Die Deflection)
• Pressure Die Assist
• Servo Carriage Boost
• Panasonic Servo Motors
• Mandrel Lubricator
• Mandrel Extractor
• Mandrel Early Out Programmable
• BendPro G2 Control
• Clockwise Rotation

ADDITIONAL SPECIFICATIONS FOR THE 150 CNC-B

• Capacity: 1.50″ OD x .125 Wall
• Maximum Feeding: 130ft/min
• Maximum POB: 40r/min
• Standard Maximum Radius: 10 inch
• Maximum Bend Angle: 190 degrees
• Operating Pressure: 1200psi
• Reservoir Capacity: 120 U.S. Gallons
• Approximate Weight: 7000 lbs
• Approximate Dimensions: 12’ L x 4’ W x 42” H
• Voltage: 220 volt/3 Phase/60Hz; 50Hz Optional
• Bend angle accuracy +/-: 0.1 degree
• Bend arm speed: 10 rpm
• Maximum tube length over mandrel: 6 ft
• Motor: 10HP

THE 200 CNC-B TUBE BENDER IS LOADED WITH ALL THE FEATURES AND FUNCTIONALITY OF A LARGER MACHINE AT A LOWER COST SHOWN HERE WITH A BENDPRO G2 CONTROL.

If you are looking to “step-it-up” and need a bending machine that can produce 3-axis, larger outside diameter (O.D.) bends, then the 200 CNC-B Bending Machine is exactly what you need. The bender’s 2.50” O.D. capacity provides you with a built-in advantage for selling sophisticated auto parts: the capacity to dramatically expand your product line.

The 200 CNC-B bender is known to produce a wide range of parts with ease.

200 CNC-B Tube Bender Applications
The 200 CNC-B bender is used throughout the exhaust, automotive, RV and Offroad/ATV industries. Firms selling bull bars and roll cages produce their products using 200 CNC-B benders.

If you need a machine or tooling quoted just let us know. Hines can provide you with the tooling you need.

FEATURES OF THE 200 CNC-B TUBE BENDER

• Simple input of machine parameters, DOB, DBB, POB (PLC-FX3U
  series Mitsubishi)
• Memory capacity: Unlimited
• Operational modes: jog, step and auto
• Self diagnosis: displays of fault source and remedies
• Identification of single bend from multi-bend part.
• Self option carriage use
• Safety auto prevention from bending operation when
  last end section is too short
• Speed levels of DOB, DBB, and POB: 16 variable settings
• Repeatability precision: DOB/POB: 0.1deg; DBB: 0.1mm
• Resolution: DOB/POB: 0.1deg; DBB: 0.1mm
• Parameter preset resolution: DOB/POB: 0.1deg; DBB: 0.1mm
• Northman Directional Valves
• Preset of processing, i.e., with mandrel or without mandrel,
  auto mandrel lubrication, speed levels of DOB, DBB, and
  POB / Servo System – Series A, National (Japan)

STANDARD

• Pressure Die Holder
• Wiper Die Holder
• Overhead Tie Bar (Eliminates Die Deflection)
• Pressure Die Assist
• Servo Carriage Boost
• Panasonic Servo Motors
• Mandrel Lubricator
• Mandrel Extractor
• Mandrel Early Out Programmable
• BendPro G2 Control
• Clockwise Rotation

ADDITIONAL SPECIFICATIONS FOR THE 200 CNC-B

• Capacity: 2.5″ OD x .200 Wall
• Maximum Feeding: 55ft/min
• Maximum POB: 28r/min
• Standard Maximum Radius: 12 inch
• Maximum Bend Angle: 190 degrees
• Operating Pressure: 2000 psi
• Reservoir Capacity: 175 US gallons
• Approximate Weight: 10000lbs
• Approximate Dimensions: 15′ L x 5′ W x 4.5′ H
• Voltage: 220 volt/440/3 Phase/60Hz; 50Hz Optional
• Bend angle accuracy +/-: 0.1 degree
• Bend arm speed: 5 rpm
• Maximum tube length over mandrel: 8ft
• Motor: 25HP

THE 300 CNC-B BENDER IS WELL SUITED FOR THE AUTOMOTIVE EXHAUST INDUSTRY

The 300 CNC-B is our most popular computer numerically controlled bender. The 300 CNC-B is the choice of firms in the automotive industry that produce mid- to large exhaust systems needing 2” to 4” bends. With the flexibility to produce both production and custom parts, having a 300 CNC-B bending machine as part of your arsenal means you will quickly earn a hefty return on your investment.

Especially well suited for the automotive industry, the 300 CNC-B should be an integral part in your manufacturing stable.

300 CNC-B Tube Bender Applications
The 300 CNC-B bender is extreme workhorse in the automotive, pipe and tube fabricating industries, i.e., for hydraulic lines.

FEATURES OF THE 300 CNC-B TUBE BENDER

• Simple input of machine parameters, DOB, DBB, POB (PLC-FX3U
  series Mitsubishi)
• Memory capacity: Unlimited
• Operational modes: jog, step and auto
• Self diagnosis: displays of fault source and remedies
• Identification of single bend from multi-bend part.
• Self option carriage use
• Safety auto prevention from bending operation when
  last end section is too short
• Speed levels of DOB, DBB, and POB: 16 variable settings
• Repeatability precision: DOB/POB: 0.1deg; DBB: 0.1mm
• Resolution: DOB/POB: 0.1deg; DBB: 0.1mm
• Parameter preset resolution: DOB/POB: 0.1deg; DBB: 0.1mm
• Northman Directional Valves
• Preset of processing, i.e., with mandrel or without mandrel,
  auto mandrel lubrication, speed levels of DOB, DBB, and
  POB / Servo System – Series A, National (Japan)

STANDARD

• Pressure Die Holder
• Wiper Die Holder
• Overhead Tie Bar (Eliminates Die Deflection)
• Pressure Die Assist
• Servo Carriage Boost
• Panasonic Servo Motors
• Mandrel Lubricator
• Mandrel Extractor
• Mandrel Early Out Programmable
• BendPro G2 Control
• Clockwise Rotation

ADDITIONAL SPECIFICATIONS FOR THE 300 CNC-B

• Capacity: 4.25″ OD x .200 Wall
• Maximum Feeding: 33ft/min
• Maximum POB: 20 r/min
• Standard Maximum Radius: 14 inch
• Maximum Bend Angle: 190 degrees
• Operating Pressure: 2000 psi
• Reservoir Capacity: 175 US gallons
• Approximate Weight: 14500 lbs
• Approximate Dimensions: 20′ L x 5′ W x 6′ H
• Voltage: 220 volt/440/3 Phase 60 Hz, 50 Hz optional
• Bend angle accuracy +/-: 0.1 degree
• Bend arm speed: 2rpm
• Maximum tube length over mandrel: 9 1/2 ft
• Motor: 30HP

FAST-GROWING TRUCK EXHAUST SHOPS NEED A TUBE BENDER THAT CAN HANDLE 6” O.D. PIPE AND THE 600 NC TUBE BENDER FILLS THE TREMENDOUS NEED.

If you need to bend extremely heavy pipe or very large outside diameter (O.D.) bends, then the 600 CNC-B Bending Machine is your only choice. The 600 CNC-B’s ability to bend up to 5.5” O.D. produces consistently high quality, extremely heavy wall parts. Its “heavy duty” nature means you will be able to tackle virtually any job without hesitation.

A relentless workhorse, the 600 CNC-B bender delivers the toughest of all bending jobs: extremely heavy pipe.

600 CNC-B Tube Bender Applications
The 600 CNC-B bender is widely utilized in the automotive industry – for truck steps, truck stacks and axle frames – the aircraft and shipbuilding industries.

FEATURES OF THE 600 CNC-B TUBE BENDER

• Simple input of machine parameters, DOB, DBB, POB (PLC-FX3U
  series Mitsubishi)
• Memory capacity: Unlimited
• Operational modes: jog, step and auto
• Self diagnosis: displays of fault source and remedies
• Identification of single bend from multi-bend part.
• Self option carriage use
• Safety auto prevention from bending operation when
  last end section is too short
• Speed levels of DOB, DBB, and POB: 16 variable settings
• Repeatability precision: DOB/POB: 0.1deg; DBB: 0.1mm
• Resolution: DOB/POB: 0.1deg; DBB: 0.1mm
• Parameter preset resolution: DOB/POB: 0.1deg; DBB: 0.1mm
• Northman Directional Valves
• Preset of processing, i.e., with mandrel or without mandrel,
  auto mandrel lubrication, speed levels of DOB, DBB, and
  POB / Servo System – Series A, National (Japan)

STANDARD

• Pressure Die Holder
• Wiper Die Holder
• Overhead Tie Bar (Eliminates Die Deflection)
• Pressure Die Assist
• Servo Carriage Boost
• Panasonic Servo Motors
• Mandrel Lubricator
• Mandrel Extractor
• Mandrel Early Out Programmable
• BendPro G2 Control
• Clockwise Rotation

ADDITIONAL SPECIFICATIONS FOR THE 600 CNC-B

• Capacity: 6″ OD x .250 Wall
• Maximum Feeding: 33 feet/minute
• Maximum POB: 20 r/min
• Standard Maximum Radius: 18 inch
• Maximum Bend Angle: 190 degrees
• Operating Pressure: 2300psi
• Reservoir Capacity: 275 US gallons
• Approximate Weight: 26000lbs
• Approximate Dimensions: 24′ L x 7′ W x 6′ H
• Voltage: 440/480/3 Phase
• Bend angle accuracy +/-: 0.1 degree
• Bend arm speed: 2 rpm
• Maximum tube length over mandrel: 14 ft
• Motor: 40HP

THE 800 CNC-B BENDER PRODUCES VERY LARGE BENDS

If your company needs a bending machine that can produce multiple, heavy wall bends, then the 800 CNC-B bender is for you. The 800 CNC-B produces very large bends up to 6.625” O.D. Most importantly, the 800 CNC-B eliminates the need to weld parts together. As a result, costly X-rays are eliminated. And eliminating the need to weld or X-ray parts means you can deliver high quality parts while keeping costs contained.

The 800 CNC-B bender’s cost saving attributes means you will be able to deliver parts at or below your competitor’s prices, a real leg-up in a highly competitive marketplace.

800 CNC-B Tube Bender Applications
The 800 CNC-B bender is used for commercial refrigeration units, large truck parts, bellow, expansion and joint bending.

If you need a machine or tooling quoted just let us know. 

FEATURES OF THE 800 CNC-B TUBE BENDER

• Simple input of machine parameters, DOB, DBB, POB (PLC-FX3U
  series Mitsubishi)
• Memory capacity: Unlimited
• Operational modes: jog, step and auto
• Self diagnosis: displays of fault source and remedies
• Identification of single bend from multi-bend part.
• Self option carriage use
• Safety auto prevention from bending operation when
  last end section is too short
• Speed levels of DOB, DBB, and POB: 16 variable settings
• Repeatability precision: DOB/POB: 0.1deg; DBB: 0.1mm
• Resolution: DOB/POB: 0.1deg; DBB: 0.1mm
• Parameter preset resolution: DOB/POB: 0.1deg; DBB: 0.1mm
• Northman Directional Valves
• Preset of processing, i.e., with mandrel or without mandrel,
  auto mandrel lubrication, speed levels of DOB, DBB, and
  POB / Servo System – Series A, National (Japan)

STANDARD

• Pressure Die Holder
• Wiper Die Holder
• Overhead Tie Bar (Eliminates Die Deflection)
• Pressure Die Assist
• Servo Carriage Boost
• Panasonic Servo Motors
• Mandrel Lubricator
• Mandrel Extractor
• Mandrel Early Out Programmable
• BendPro G2 Control
• Clockwise Rotation

ADDITIONAL SPECIFICATIONS FOR THE 800 CNC-B

• Capacity: 6.625″ OD x .550 Wall
• Maximum POB: 20 r/min
• Standard Maximum Radius: 22 inch
• Maximum Bend Angle: 190 degrees
• Operating Pressure: 2300psi
• Reservoir Capacity: 340 US gallons
• Approximate Weight: 39000lbs
• Approximate Dimensions: 33′ L x 8′ W x 6′ H
• Voltage: 440/480/3 Phase
• Bend angle accuracy +/-: 0.1 degree
• Bend arm speed: 0.6rpm
• Maximum tube length over mandrel: 20 ft
• Motor: 50HP

If your customers’ pipe or tube bending requirements include oil and gas or construction, then the 1000 CNC-B tube is the machine of choice. Its ability to bend extremely heavy pipe up to 8” means you can effectively ensure quality across piping systems.

The 1000 CNC-B is very popular in manufacturing for the most difficult of jobs for heavy wall pipe bending.

1000 CNC-B Heavy and Thick Wall Tubing Bender Applications
The 1000 NC bender is used largely in the oil and gas industry and construction industries

FEATURES OF THE 1000 CNC-B TUBE BENDER

• Simple input of machine parameters, DOB, DBB, POB (PLC-FX3U
  series Mitsubishi)
• Memory capacity: Unlimited
• Operational modes: jog, step and auto
• Self diagnosis: displays of fault source and remedies
• Identification of single bend from multi-bend part.
• Self option carriage use
• Safety auto prevention from bending operation when
  last end section is too short
• Speed levels of DOB, DBB, and POB: 16 variable settings
• Repeatability precision: DOB/POB: 0.1deg; DBB: 0.1mm
• Resolution: DOB/POB: 0.1deg; DBB: 0.1mm
• Parameter preset resolution: DOB/POB: 0.1deg; DBB: 0.1mm
• Northman Directional Valves
• Preset of processing, i.e., with mandrel or without mandrel,
  auto mandrel lubrication, speed levels of DOB, DBB, and
  POB / Servo System – Series A, National (Japan)

STANDARD

• Pressure Die Holder
• Wiper Die Holder
• Overhead Tie Bar (Eliminates Die Deflection)
• Pressure Die Assist
• Servo Carriage Boost
• Panasonic Servo Motors
• Mandrel Lubricator
• Mandrel Extractor
• Mandrel Early Out Programmable
• BendPro G2 Control
• Clockwise Rotation

ADDITIONAL SPECIFICATIONS FOR THE 1000 CNC-B

• Capacity: 8” x SCHED 80 x 5D
• Maximum Feeding: 65.6 feet/minute
• Maximum POB: 1 RPM
• DOB – Bending Arm Speed: 0.5
• Maximum Bend Radius: 5D
• Maximum Bend Angle: 190 degrees
• Operating Pressure: 2500 psi
• Approximate Weight: 27 tons
• Bend angle accuracy +/-: 0.1 degree
• Bend arm speed: 15rpm
• Electrical Power: 480/Customer specifications
• Maximum tube length over mandrel: 20ft
• Motor: 75HP

THE 150 NC TUBE BENDER IS THE INTERMEDIATE AND AFFORDABLE CHOICE PRODUCING BENDS UP TO 1.50″ O.D.

The 150 NC tube bender makes great economic sense. Loaded with all the features and functionality of a much larger mandrel bending machine, the 150 NC bending machine is a conservative step-up investment that easily accommodates a rapidly expanding tube and pipe bending operation. Traditionally, the 150 NC tube bender has been the intermediate and affordable choice that produces bends up to 1.50″ OD.

 150 NC Tube Bender Applications
Because of its versatility, the 150 NC tube bender is used in many diverse industries including automotive (i.e., motorcycle exhaust), heating and cooling,
medical, furniture and plumbing.

If you need a machine or tooling quote just let us know!

FEATURES OF THE 150 NC TUBE BENDER

• Hydraulic Manifolds Interchangeable (Parker, Vickers, etc.)

• Solid Machined Steel Bend Arms

• Easy Touch Screen Operation

• Includes All Die Holders

• Operator Safety Features

• Manifold Style Hydraulic and High Pressure Filter

STANDARD EQUIPMENT

• Pressure Die Holder

• Wiper Die Holder

• Overhead Tie Bar (Eliminates Die Deflection)

• Pressure Die Assist

• Pressure Die Assist Rear Support Roller

• Mandrel Rod SAE Thread Supplied (1)

• Mandrel Lubricator

• Mandrel Extractor

• Mandrel Early Out Programmable

• PLC Controller – Mitsubishi FX3U

• Memory Capacity: 100 job storage, 6 bends per part

• Touch Screen (Proface America)

• Tube Piece Counter

• Clockwise Rotation

• Dual Stage Pump Hydraulic System

ADDITIONAL SPECIFICATIONS FOR THE 150 NC

• Capacity: 1.50″ OD x .125 Wall

• Standard Maximum Radius: 9 inch

• Maximum Bend Angle: 190 degrees

• Bend Angle Accuracy (+ / -): 0.1 degree

• Bend Arm Speed: 6 RPM

• Maximum Tube Length Over Mandrel: 6 feet

• Motor: 10 HP

• Operating Pressure: 1200psi

• Reservoir Capacity: 135 US gallons

• Approximate Weight: 6600 lbs

• Approximate Dimensions: 9′ L x 3.5′ W x 4′ H

• Voltage: 220/3 Phase/60Hz (50 Hz Optional)

If you are a job shop or a startup that needs to bend virtually any part up to 3 inch O.D.”, then the 200 NC tube bender is your best bet. The 200 NC has earned a reputation as an industry workhorse designed to bend tube, pipe, square, rectangular, extrusion, 1D, thin wall tube or large pipe. Its flexibility means you can meet a broad range of customer demands without breaking the bank. Categorically, the 200 NC tube bender is a smaller bending machine that is loaded with all the features and functionality of a much larger machine only at a much lower cost.

200 NC Tube Bender Applications
The 200 NC tube bender is used in the power generation industry (for boiler and heat exchange), plumbing, automotive (mufflers, headers, exhaust), steel building construction and ship repairs.

FEATURES OF THE 200 NC TUBE BENDER

• Hydraulic Manifolds Interchangeable (Parker, Vickers, etc.)

• Solid Machined Steel Bend Arms

• Easy Touch Screen Operation

• Includes All Die Holders

• Operator Safety Features

• Manifold Style Hydraulic and High Pressure Filter

STANDARD EQUIPMENT

• Wiper Die Holder

• Overhead Tie Bar (Eliminates Die Deflection)

• Pressure Die Assist

• Pressure Die Assist Rear Support Roller

• Mandrel Rod SAE Thread Supplied (1)

• Mandrel Lubricator

• Mandrel Extractor

• Mandrel Early Out Programmable

• PLC Controller – Mitsubishi FX3U

• Memory Capacity: 100 job storage, 6 bends per part

• Touch Screen (Proface America)

• Tube Piece Counter

• Clockwise Rotation

• Dual Stage Pump Hydraulic System

ADDITIONAL SPECIFICATIONS FOR THE 200 NC

• Capacity: 3″ OD x .125 Wall

• Standard Maximum Radius: 12 inch

• Maximum Bend Angle: 190 degrees

• Bend Angle Accuracy (+ / -): 0.1 degree

• Bend Arm Speed: 5 RPM

• Maximum Tube Length Over Mandrel: 9 feet

• Motor: 15 HP

• Operating Pressure: 2000 psi

• Reservoir Capacity: 135 US gallons

• Approximate Weight: 7700lbs

• Approximate Dimensions: 13′ L x 3.5′ W x 4′ H

• Voltage: 220/3 Phase/60Hz (50 Hz Optional)

Hands down, the 300 NC tube bender is our most
popular machine. We stock these tube benders for quick delivery. The 300 NC tube bender is a high volume, high quality, dependable machine that is not cluttered with a lot of bells and whistles that will never be used. In any economy or budget, this machine will keep you bending for years with every feature you will need to do the jobs that come your way.

300 NC Tube Bender Applications
The 300 NC tube bender is used worldwide in the power generation industry (boiler and heat exchange), fabrication, automotive (mufflers, headers, exhaust), marine exhaust, offshore oil and gas industry (deep water applications), bicycle racks and fitness equipment.

FEATURES OF THE 300 NC TUBE BENDER

• Hydraulic Manifolds Interchangeable (Parker, Vickers, etc.)

• Solid Machined Steel Bend Arms

• Easy Touch Screen Operation

• Includes All Die Holders

• Operator Safety Features

• Manifold Style Hydraulic and High Pressure Filter

STANDARD EQUIPMENT

• Pressure Die Holder

• Wiper Die Holder

• Overhead Tie Bar (Eliminates Die Deflection)

• Pressure Die Assist

• Pressure Die Assist Rear Support Roller

• Mandrel Rod SAE Thread Supplied (1)

• Mandrel Lubricator

• Mandrel Extractor

• Mandrel Early Out Programmable

• PLC Controller – Mitsubishi FX3U

• Memory Capacity: 100 job storage, 6 bends per part

• Touch Screen (Proface America)

• Tube Piece Counter

• Clockwise Rotation

• Dual Stage Pump Hydraulic System

ADDITIONAL SPECIFICATIONS FOR THE 300 NC

• Capacity: 4″ OD x .226 Wall

• Standard Maximum Radius: 18 inch

• Maximum Bend Angle: 190 degrees

• Bend Angle Accuracy (+ / -): 0.1 degree

• Bend Arm Speed: 3.5 RPM

• Maximum Tube Length Over Mandrel: 10 feet

• Motor: 20 HP

• Operating Pressure: 2000 psi

• Reservoir Capacity: 150 U.S. Gallons

• Approximate Weight: 13800 lbs

• Approximate Dimensions: 15′ L x 6′ W x 5.5′ H

• Voltage: 220/440/3 Phase/60Hz (50 Hz Optional)

If you are an executive or manager of a petro chemical or power plant and you are evaluating options to control costs, eliminate downtime and improve quality, then a 300 NC-P bender should be on your radar to purchase. With heavy-duty construction, the 300 NC-P Bending Machine has established itself as the bender of choice by many facilities around the globe. Its user-friendly operation means you will be able to easily “in source” your bending production, lowering costs and improving quality.

Empirically, the 300 NC-P bender has established itself as the bender of choice by many power plant facilities around the globe.

300 NC-P Tube Bender Applications
The 300 NC-P bender is used exclusively in the petro chemical and the electrical power plant industries.

If you need a machine or tooling quote just let us know!

FEATURES OF THE 300 NC-P TUBE BENDER

• Hydraulic Manifolds Interchangeable (Parker, Vickers, etc.)

• Solid Machined Steel Bend Arms

• Easy Touch Screen Operation

• Includes All Die Holders

• Operator Safety Features

• Manifold Style Hydraulic and High Pressure Filter

STANDARD EQUIPMENT

• Pressure Die Holder

• Wiper Die Holder

• Overhead Tie Bar (Eliminates Die Deflection)

• Pressure Die Assist

• Pressure Die Assist Rear Support Roller

• Mandrel Rod SAE Thread Supplied (1)

• Mandrel Lubricator

• Mandrel Extractor

• Mandrel Early Out Programmable

• PLC Controller – Mitsubishi FX3U Stores 200 Jobs – 6 bends/job

• Touch Screen (Proface America)

• Tube Piece Counter

• Clockwise Rotation

• Dual Stage Pump Hydraulic System

ADDITIONAL SPECIFICATIONS FOR THE 300 NC-P

• Capacity: 3 1/2” O.D. x .50 Wall

• Standard Maximum Radius: 12 inch

• Maximum Bend Angle: 190 degrees

• Bend Angle Accuracy (+ / -): 0.1 degree

• Bend Arm Speed: 1.5 RPM

• Motor: 40 HP

• Operating Pressure: 2000 psi

• Reservoir Capacity: 240 US gallons

• Approximate Weight: 17000lbs

• Approximate Dimensions: 16′ L x 7′ W x 6′ H

• Voltage: 440/480/3 Phase/60Hz

• Rear Boost

If you need a bending machine that covers a wide range of larger outside diameter (O.D.) and heavy wall bends, then the 600 NC tube bender is the industry leader. The wide range of O.D. sizes the 600 NC handles means you will be able to produce an equally wide range of heavy wall bends with one bending machine.

Unquestionably, the 600 NC bender is a workhorse for the production of high quality, large O.D. bends.

THE 800 NC TUBE BENDER PROVIDES MAXIMUM BENDING FLEXIBILITY AT AN EXCEPTIONALLY LOW COST.

If you need a tube bender that can handle both very large outside diameter (O.D.) bends and also heavy wall bending, then the Hines 800 NC bender will meet all your needs and then some.

The 800 NC Bending Machine was designed for turbo pipes, turbines, bellows and other attachments. Its ability to produce quality large, heavy bends inhouse means you can reduce your reliance on outside suppliers, improving profit margins.

Undeniably, the 800 NC bender provides maximum functionality for an exceptional cost.

800 NC Tube Bender Applications
The 800 NC bender is used by the agricultural and mining industries.

If you need a machine or tooling quote just let us know!

FEATURES OF THE 800 NC TUBE BENDER

• Hydraulic Manifolds Interchangeable (Parker, Vickers, etc.)

• Solid Machined Steel Bend Arms

• Easy Touch Screen Operation

• Includes All Die Holders

• Operator Safety Features

• Manifold Style Hydraulic and High Pressure Filter

STANDARD EQUIPMENT

• Pressure Die Holder

• Wiper Die Holder

• Overhead Tie Bar (Eliminates Die Deflection)

• Pressure Die Assist

• Pressure Die Assist Rear Support Roller

• Mandrel Rod SAE Thread Supplied (1)

• Mandrel Lubricator

• Mandrel Extractor

• Mandrel Early Out Programmable

• PLC Controller – Mitsubishi FX3U

• Memory Capacity: 100 job storage, 6 bends per part

• Touch Screen (Proface America)

• Tube Piece Counter

• Clockwise Rotation

• Dual Stage Pump Hydraulic System

ADDITIONAL SPECIFICATIONS FOR THE 800 NC

• Capacity: 6.625″ OD x .550 Wall

• Standard Maximum Radius: 22 inch

• Maximum Bend Angle: 190 degrees

• Bend Angle Accuracy (+ / -): 0.1 degree

• Bend Arm Speed: 0.6rpm

• Maximum Tube Length Over Mandrel: 20 feet

• Motor: 40 HP

• Operating Pressure: 2300 psi

• Reservoir Capacity: 340 US gallons

• Approximate Weight: 35000lbs

• Approximate Dimensions: 30′ L x 8′ W x 5.5′ H

• Voltage: 440/480/3 Phase/60Hz

If your customers’ pipe or tube bending requirements include oil and gas, automotive or construction, then the 1000 NC tube bender is the machine of choice. Its ability to bend extremely heavy pipe means you can efficiently ensure quality across piping systems at an affordable cost.

The 1000 NC bender is a giant in the manufacturing world for the most difficult of jobs for heavy wall pipe bending. Undeniably, the 1000 NC bender provides maximum functionality for an exceptional cost.

1000 NC Tube Bender Applications
The 1000 NC bender is used largely in the oil and gas industry, automotive and construction industries.

If you need a machine or tooling quote Just let us know!

FEATURES OF THE 1000 NC TUBE BENDER

• Hydraulic Manifolds Interchangeable (Parker, Vickers, etc.)

• Solid Machined Steel Bend Arms

• Easy Touch Screen Operation

• Includes All Die Holders

• Operator Safety Features

• Manifold Style Hydraulic and High Pressure Filter

STANDARD EQUIPMENT

• Wiper Die Holder

• Overhead Tie Bar (Eliminates Die Deflection)

• Pressure Die Assist

• Pressure Die Assist Rear Support Roller

• Mandrel Rod SAE Thread Supplied (1)

• Mandrel Lubricator

• Mandrel Extractor

• Mandrel Early Out Programmable

• PLC Controller – Mitsubishi FX3U

• Memory Capacity: 100 job storage, 6 bends per part

• Touch Screen (Proface America)

• Tube Piece Counter

• Clockwise Rotation

• Dual Stage Pump Hydraulic System

ADDITIONAL SPECIFICATIONS FOR THE 1000 NC

• Capacity: 10.75” O.D. x .625 Wall x 3D

• Standard Maximum Radius: 1050mm

• Maximum Bend Angle: 190 degrees

• Bend Angle Accuracy (+ / -): 0.25 degree

• Bend Arm Speed: 0-.3 RPM

• Maximum Tube Length Over Mandrel: 20 feet

• Centerline Height: 1422mm

• Minimum Radius: 100mm

• DOB Speed: 0 – 0.5 RPM

• Mandrel Stroke: 356mm

• Mandrel Rod Adjustable: 0-102mm

• Boost Stroke: 1700mm

• Bending Torque: 85 Ton/M

• Motor: 45KW

• Operating Pressure: 16MPA

• Reservoir Capacity: 350 U.S. Gallons

• Approximate Weight: 60,000 lbs

• Approximate Dimensions: 32’ L x 17.5’ W x 6.5’ H

• Voltage: 440/480/3 Phase/60Hz

1200 NC TUBE BENDER IS A GIANT IN THE MANUFACTURING WORLD FOR DIFFICULT JOBS FOR HEAVY WALL PIPE BENDING.

If your customers’ pipe or tube requirements include steam, condensate, chilled water, heating water, high-temperature hot water, cryogenics, jet fuel, solvents or oil, then the 1200 NC tube bender is the machine of choice. Its ability to bend extremely heavy pipe means you can effectively ensure quality across piping systems at an affordable cost.

Undoubtedly, the 1200 NC bender is a giant in the manufacturing world for the most difficult of jobs for heavy wall pipe bending.

1200 NC Tube Bender Applications
The 1200 NC bender is used largely for pre-insulated piping systems.

If you need a machine or tooling quote just let us know!

FEATURES OF THE 1200 NC TUBE BENDER

• Hydraulic Manifolds Interchangeable (Parker, Vickers, etc.)

• Solid Machined Steel Bend Arms

• Easy Touch Screen Operation

• Includes All Die Holders

• Operator Safety Features

• Manifold Style Hydraulic and High Pressure Filter

STANDARD EQUIPPED

• Wiper Die Holder

• Overhead Tie Bar (Eliminates Die Deflection)

• Pressure Die Assist

• Pressure Die Assist Rear Support Roller

• Mandrel Rod SAE Thread Supplied (1)

• Mandrel Lubricator

• Mandrel Extractor

• Mandrel Early Out Programmable

• PLC Controller – Mitsubishi FX3U

• Memory Capacity: 100 job storage, 6 bends per part

• Touch Screen (Proface America)

• Tube Piece Counter

• Clockwise Rotation

• Dual Stage Pump Hydraulic System

ADDITIONAL SPECIFICATIONS FOR THE 1200 NC

• Capacity: 12” O.D. x .625 Wall

• Standard Maximum Radius: 26 inch

• Maximum Bend Angle: 190 degrees

• Bend Angle Accuracy (+ / -): 0.25 degree

• Bend Arm Speed: 0.4 RPM

• Maximum Tube Length Over Mandrel: 24 feet

• Motor: 130 HP

• Operating Pressure: 2500 psi

• Reservoir Capacity: 450 U.S. Gallons

• Approximate Weight: 200000lbs

• Approximate Dimensions: 36’ L x 19’ W x 9’ H

• Voltage: 440/480/3 Phase/60Hz

HEAVY CONSTRUCTION PROJECTS EMPLOY 219 INDUCTION BENDERS.

For quality, consistently uniform bends, Induction Benders are your best choice. Induction Benders produce mechanical forming on a wide range of materials and a wide range of O.D. bending, from 4” to 56.”

All Induction Benders are computer controlled.

The 219 Induction Bender is perfect for:

• Petrochemical

• Thermal or nuclear power plants

• Mining

• Agro-food

• Paper

• Oil and gas (onshore and offshore pipelines)

• Highway billboards

• Structure construction

• Solar companies

If you need a machine or tooling quote just let us know!

STANDARD FEATURES OF THE 219 INDUCTION BENDER

• All functions electrically and hydraulically controlled.

• Dual Hydraulic Systems.

• Touch screen displays bend degree. Stops the machine when arriving to the preset degree value.

• Easily accessible transformer.

• Tube support included.

• Operator panel included.

• Electrical requirements per requisition. All available.

• Adjustable power.

• The output voltage fluctuation is within +/- 1% even if the input power voltage fluctuates +/- 10%. This keeps temperature consistent inside the inductor during the heating process.

• Built-in surge protection.

• Phase locking is employed to track frequency so that inverter operates safely and efficiently.

• Start-up at zero voltage. No amperage draw.

• All parameters are pre-set at factory. No need to recalibrate.

ADDITIONAL SPECIFICATIONS FOR THE 219 INDUCTION BENDER

• Max O.D. x Wall (mm) – 219 x 18

• Min O.D. (mm) – 76

• Maximum Bend Angle: 180 degrees

• CLR

  Range (mm) – 200 to 1200

  Min (R/D) – 2.5

• Max Main Cylinder Stroke (M) – 2.5

• Induction Power

  Type (KGPS) – 160

  Power (KW) – 160

  Frequency (KHz) – 0.8 to 1

• Bend Speed (mm/sec) – 0.3 to 4

• Rear Clamp Speed (M/min) – 1.5

• Rear Clamp Back (M/min) – 3

• System Pressure (mpa) – 10

• Machine CL Height (M) – 1

• Overall Dimensions (M) – 9 x 1.9 x 1.8

• Machine Weight (tons) – 15

ENERGY COMPANIES USE THE 325 INDUCTION BENDER.

For quality, consistently uniform bends, Induction Benders are your best choice. Induction Benders produce mechanical forming on a wide range of materials and a wide range of O.D. bending, from 4” to 56.”

All Induction Benders are computer controlled.

The 325 Induction Bender is perfect for:

• Petrochemical

• Thermal or nuclear power plants

• Mining

• Agro-food

• Paper

• Oil and gas (onshore and offshore pipelines)

• Highway billboards

• Structure construction

• Solar companies

If you need a machine or tooling quote just let us know!

FEATURES OF THE 325 INDUCTION BENDER

• All functions electrically and hydraulically controlled.

• Dual Hydraulic Systems.

• Touch screen displays bend degree. Stops the machine when arriving to the preset degree value.

• Easily accessible transformer.

• Tube support included.

• Operator panel included.

• Electrical requirements per requisition. All available.

• Adjustable power.

• The output voltage fluctuation is within +/- 1% even if the input power voltage fluctuates +/- 10%. This keeps temperature consistent inside the inductor during the heating process.

• Built-in surge protection.

• Phase locking is employed to track frequency so that inverter operates safely and efficiently.

• Start-up at zero voltage. No amperage draw.

• All parameters are pre-set at factory. No need to recalibrate.

ADDITIONAL SPECIFICATIONS FOR THE 325 INDUCTION BENDER

• Max O.D. x Wall (mm) – 325 x 25

• Min O.D. (mm) – 102

• Maximum Bend Angle: 180 degrees

• CLR

  • Range (mm) – 300 to 1800

  • Min (R/D) – 3

• Max Main Cylinder Stroke (M) – 3

• Induction Power

  • Type (KGPS) – 250

  • Power (KW) – 250

  • Frequency (KHz) – 0.8 to 1

• Bend Speed (mm/sec) – 0.3 to 4

• Rear Clamp Speed (M/min) – 1.5

• Rear Clamp Back (M/min) – 3

• System Pressure (mpa) – 10

• Machine CL Height (M) – 1.2

• Overall Dimensions (M) – 10 x 3.3 x 2.2

• Machine Weight (tons) – 25

CLOSE-UP OF A 426 INDUCTION BENDER PRODUCING BENDS FOR A CHEMICAL COMPANY.

For quality, consistently uniform bends, Induction Benders are your best choice. Induction Benders produce mechanical forming on a wide range of materials and a wide range of O.D. bending, from 4” to 56.”

All Induction Benders are computer controlled.

The 426 Induction Bender is perfect for:

• Petrochemical

• Thermal or nuclear power plants

• Mining

• Agro-food

• Paper

• Oil and gas (onshore and offshore pipelines)

• Highway billboards

• Structure construction

• Solar companies

If you need a machine or tooling quote just let us know!

STANDARD FEATURES OF THE 426 INDUCTION BENDER

• All functions electrically and hydraulically controlled.

• Dual Hydraulic Systems.

• Touch screen displays bend degree. Stops the machine when arriving to the preset degree value.

• Easily accessible transformer.

• Tube support included.

• Operator panel included.

• Electrical requirements per requisition. All available.

• Adjustable power.

• The output voltage fluctuation is within +/- 1% even if the input power voltage fluctuates +/- 10%. This keeps temperature consistent inside the inductor during the heating process.

• Built-in surge protection.

• Phase locking is employed to track frequency so that inverter operates safely and efficiently.

• Start-up at zero voltage. No amperage draw.

• All parameters are pre-set at factory. No need to recalibrate.

ADDITIONAL SPECIFICATIONS FOR THE 426 INDUCTION BENDER

• Max O.D. x Wall (mm) – 426 x 30

• Min O.D. (mm) – 127

• Maximum Bend Angle: 180 degrees

• CLR

  Range (mm) – 380 to 2200

  Min (R/D) – 3

• Max Main Cylinder Stroke (M) – 3.5

• Induction Power

  Type (KGPS) – 350

  Power (KW) – 350

  Frequency (KHz) – 0.8 to 1

• Bend Speed (mm/sec) – 0.3 to 3

• Rear Clamp Speed (M/min) – 1

• Rear Clamp Back (M/min) – 1.5

• System Pressure (mpa) – 14

• Machine CL Height (M) – 1.3

• Overall Dimensions (M) – 11 x 4 x 2.5

• Machine Weight (tons) – 32

ENERGY COMPANIES USE THE 530 INDUCTION BENDER.

For quality, consistently uniform bends, Induction Benders are your best choice. Induction Benders produce mechanical forming on a wide range of materials and a wide range of O.D. bending, from 4” to 56.”

All Induction Benders are computer controlled.

The 530 Induction Bender is perfect for:

• Petrochemical
• Thermal or nuclear power plants
• Mining
• Agro-food
• Paper
• Oil and gas (onshore and offshore pipelines)
• Highway billboards
• Structure construction
• Solar companies

If you need a machine or tooling quote just let us know!

STANDARD FEATURES OF THE 530 INDUCTION BENDER

• All functions electrically and hydraulically controlled.
• Dual Hydraulic Systems.
• Touch screen displays bend degree. Stops the machine when arriving to the preset degree value.
• Easily accessible transformer.
• Tube support included.
• Operator panel included.
• Electrical requirements per requisition. All available.
• Adjustable power.
• The output voltage fluctuation is within +/- 1% even if the input power voltage fluctuates +/- 10%. This keeps temperature consistent inside the inductor during the heating process.
• Built-in surge protection.
• Phase locking is employed to track frequency so that inverter operates safely and efficiently.
• Start-up at zero voltage. No amperage draw.
• All parameters are pre-set at factory. No need to recalibrate.

ADDITIONAL SPECIFICATIONS FOR THE 530 INDUCTION BENDER

• Max O.D. x Wall (mm) – 530 x 30

• Min O.D. (mm) – 168

• Maximum Bend Angle: 180 degrees

• CLR

  Range (mm) – 450 to 2600

  Min (R/D) – 3

• Max Main Cylinder Stroke (M) – 4

• Induction Power

  Type (KGPS) – 450

  Power (KW) – 450

  Frequency (KHz) – 0.8 to 1

• Bend Speed (mm/sec) – 0.3 to 3

• Rear Clamp Speed (M/min) – 1.5

• Rear Clamp Back (M/min) – 2

• System Pressure (mpa) – 14

• Machine CL Height (M) – 1.45

• Overall Dimensions (M) – 12 x 4.8 x 2.7

• Machine Weight (tons) – 40

INFRASTRUCTURE COMPANIES USE THE 630 INDUCTION BENDER.

For quality, consistently uniform bends, Induction Benders are your best choice. Induction Benders produce mechanical forming on a wide range of materials and a wide range of O.D. bending, from 4” to 56.”

All Induction Benders are computer controlled.

The 630 Induction Bender is perfect for:

• Petrochemical

• Thermal or nuclear power plants

• Mining

• Agro-food

• Paper

• Oil and gas (onshore and offshore pipelines)

• Highway billboards

• Structure construction

• Solar companies

If you need a machine or tooling quote just let us know!

FEATURES OF THE 630 INDUCTION BENDER

• All functions electrically and hydraulically controlled.

• Dual Hydraulic Systems.

• Touch screen displays bend degree. Stops the machine when arriving to the preset degree value.

• Easily accessible transformer.

• Tube support included.

• Operator panel included.

• Electrical requirements per requisition. All available.

• Adjustable power.

• The output voltage fluctuation is within +/- 1% even if the input power voltage fluctuates +/- 10%. This keeps temperature consistent inside the inductor during the heating process.

• Built-in surge protection.

• Phase locking is employed to track frequency so that inverter operates safely and efficiently.

• Start-up at zero voltage. No amperage draw.

• All parameters are pre-set at factory. No need to recalibrate.

ADDITIONAL SPECIFICATIONS FOR THE 630 INDUCTION BENDER

• Max O.D. x Wall (mm) – 630 x 30

• Min O.D. (mm) – 168

• Maximum Bend Angle: 180 degrees

• CLR

  • Range (mm) – 450 to 3100

  • Min (R/D) – 3

• Max Main Cylinder Stroke (M) – 4.5

• Induction Power

  • Type (KGPS) – 500

  • Power (KW) – 500

  • Frequency (KHz) – 0.8 to 1

• Bend Speed (mm/sec) – 0.3 to 3

• Rear Clamp Speed (M/min) – 1

• Rear Clamp Back (M/min) – 2

• System Pressure (mpa) – 16

• Machine CL Height (M) – 1.5

• Overall Dimensions (M) – 14 x 5.2 x 2.8

• Machine Weight (tons) – 52

For quality, consistently uniform bends, Induction Benders are your best choice. Induction Benders produce mechanical forming on a wide range of materials and a wide range of O.D. bending, from 4” to 56.”

All Induction Benders are computer controlled.

The 720 Induction Bender is perfect for:

• Petrochemical

• Thermal or nuclear power plants

• Mining

• Agro-food

• Paper

• Oil and gas (onshore and offshore pipelines)

• Highway billboards

• Structure construction

• Solar companies

If you need a machine or tooling quote just let us know!

FEATURES OF THE 720 INDUCTION BENDER

• All functions electrically and hydraulically controlled.

• Dual Hydraulic Systems.

• Touch screen displays bend degree. Stops the machine when arriving to the preset degree value.

• Easily accessible transformer.

• Tube support included.

• Operator panel included.

• Electrical requirements per requisition. All available.

• Adjustable power.

• The output voltage fluctuation is within +/- 1% even if the input power voltage fluctuates +/- 10%. This keeps temperature consistent inside the inductor during the heating process.

• Built-in surge protection.

• Phase locking is employed to track frequency so that inverter operates safely and efficiently.

• Start-up at zero voltage. No amperage draw.

• All parameters are pre-set at factory. No need to recalibrate.

ADDITIONAL SPECIFICATIONS FOR THE 720 INDUCTION BENDER

• Max O.D. x Wall (mm) – 720 x 35

• Min O.D. (mm) – 219

• Maximum Bend Angle: 180 degrees

• CLR

  • Range (mm) – 650 to 3600

  • Min (R/D) – 3

• Max Main Cylinder Stroke (M) – 5.7

• Induction Power

  • Type (KGPS) – 800

  • Power (KW) – 600

  • Frequency (KHz) – 0.8 to 1

• Bend Speed (mm/sec) – 0.25 to 3

• Rear Clamp Speed (M/min) – 1

• Rear Clamp Back (M/min) – 2

• System Pressure (mpa) – 16

• Machine CL Height (M) – 1.55

• Overall Dimensions (M) – 16 x 5.7 x 2.9

• Machine Weight (tons) – 65

CONSTRUCTION FIRMS USE THE 810 INDUCTION BENDER.

For quality, consistently uniform bends, Induction Benders are your best choice. Induction Benders produce mechanical forming on a wide range of materials and a wide range of O.D. bending, from 4” to 56.”

All Induction Benders are computer controlled.

The 810 Induction Bender is perfect for:

• Petrochemical

• Thermal or nuclear power plants

• Mining

• Agro-food

• Paper

• Oil and gas (onshore and offshore pipelines)

• Highway billboards

• Structure construction

• Solar companies

If you need a machine or tooling quote just let us know!

STANDARD FEATURES OF THE 810 INDUCTION BENDER

• All functions electrically and hydraulically controlled.

• Dual Hydraulic Systems.

• Touch screen displays bend degree. Stops the machine when arriving to the preset degree value.

• Easily accessible transformer.

• Tube support included.

• Operator panel included.

• Electrical requirements per requisition. All available.

• Adjustable power.

• The output voltage fluctuation is within +/- 1% even if the input power voltage fluctuates +/- 10%. This keeps temperature consistent inside the inductor during the heating process.

• Built-in surge protection.

• Phase locking is employed to track frequency so that inverter operates safely and efficiently.

• Start-up at zero voltage. No amperage draw.

• All parameters are pre-set at factory. No need to recalibrate.

SPECIFICATIONS FOR THE 810 INDUCTION BENDER

• Max O.D. x Wall (mm) – 810 x 25

• Min O.D. (mm) – 219

• Maximum Bend Angle: 180 degrees

• CLR

  • Range (mm) – 650-4100

  • Min (R/D) – 3

• Max Main Cylinder Stroke (M) – 6.4

• Induction Power

  • Type (KGPS) – 600

  • Power (KW) – 600

  • Frequency (KHz) – 0.8 to 1

• Bend Speed (mm/sec) – 0.3 to 4

• Rear Clamp Speed (M/min) – 1.5

• Rear Clamp Back (M/min) – 3

• System Pressure (mpa) – 16

• Machine CL Height (M) – 1.6

• Overall Dimensions (M) – 18 x 6.3 x 3

• Machine Weight (tons) – 78

MINING COMPANIES USE THE 915 INDUCTION BENDER.

For quality, consistently uniform bends, Induction Benders are your best choice. Induction Benders produce mechanical forming on a wide range of materials and a wide range of O.D. bending, from 4” to 56.”

All Induction Benders are computer controlled.

The 915 Induction Bender is perfect for:

• Petrochemical
• Thermal or nuclear power plants
• Mining
• Agro-food
• Paper
• Oil and gas (onshore and offshore pipelines)
• Highway billboards
• Structure construction
• Solar companies

If you need a machine or tooling quote just let us know!

STANDARD FEATURES OF THE 915 INDUCTION BENDER

• All functions electrically and hydraulically controlled.

• Dual Hydraulic Systems.

• Touch screen displays bend degree. Stops the machine when arriving to the preset degree value.

• Easily accessible transformer.

• Tube support included.

• Operator panel included.

• Electrical requirements per requisition. All available.

• Adjustable power.

• The output voltage fluctuation is within +/- 1% even if the input power voltage fluctuates +/- 10%. This keeps temperature consistent inside the inductor during the heating process.

• Built-in surge protection.

• Phase locking is employed to track frequency so that inverter operates safely and efficiently.

• Start-up at zero voltage. No amperage draw.

• All parameters are pre-set at factory. No need to recalibrate.

OIL AND GAS COMPANIES USE THE 1020 INDUCTION BENDER.

For quality, consistently uniform bends, Induction Bender are your best choice. Induction Benders produce mechanical forming on a wide range of materials and a wide range of O.D. bending, from 4” to 56.”

All Induction Benders are computer controlled.

The 1020 Induction Bender is perfect for:

• Petrochemical

• Thermal or nuclear power plants

• Mining

• Agro-food

• Paper

• Oil and gas (onshore and offshore pipelines)

• Highway billboards

• Structure construction

• Solar companies

If you need a machine or tooling quote just let us know!

STANDARD FEATURES OF THE 1020 INDUCTION BENDER

• All functions electrically and hydraulically controlled.

• Dual Hydraulic Systems.

• Touch screen displays bend degree. Stops the machine when arriving to the preset degree value.

• Easily accessible transformer.

• Tube support included.

• Operator panel included.

• Electrical requirements per requisition. All available.

• Adjustable power.

• The output voltage fluctuation is within +/- 1% even if the input power voltage fluctuates +/- 10%. This keeps temperature consistent inside the inductor during the heating process.

• Built-in surge protection.

• Phase locking is employed to track frequency so that inverter operates safely and efficiently.

• Start-up at zero voltage. No amperage draw.

• All parameters are pre-set at factory. No need to recalibrate.

ADDITIONAL SPECIFICATIONS FOR THE 1020 INDUCTION BENDER

• Max O.D. x Wall (mm) – 1020 x 35

• Min O.D. (mm) – 273

• Maximum Bend Angle: 180 degrees

• CLR

  Range (mm) – 810 – 5100

  Min (R/D) – 3

• Max Main Cylinder Stroke (M) – 8

• Induction Power

  Type (KGPS) – 700

  Power (KW) – 700

  Frequency (KHz) – 0.8 to 1

• Bend Speed (mm/sec) – 0.3 to 3

• Rear Clamp Speed (M/min) – 1.5

• Rear Clamp Back (M/min) – 2

• System Pressure (mpa) – 16

• Machine CL Height (M) – 1.75

• Overall Dimensions (M) – 22 x 8 x 3.4

• Machine Weight (tons) – 105

ENERGY COMPANIES USE THE 1220 INDUCTION BENDER.

For quality, consistently uniform bends, Induction Benders are your best choice. Induction Benders produce mechanical forming on a wide range of materials and a wide range of O.D. bending, from 4” to 56.”

All Induction Benders are computer controlled.

The 1220 Induction Bender is perfect for:

• Petrochemical

• Thermal or nuclear power plants

• Mining

• Agro-food

• Paper

• Oil and gas (onshore and offshore pipelines)

• Highway billboards

• Structure construction

• Solar companies

If you need a machine or tooling quote just let us know!

STANDARD FEATURES OF THE 1220 INDUCTION BENDER

• All functions electrically and hydraulically controlled.

• Dual Hydraulic Systems.

• Touch screen displays bend degree. Stops the machine when arriving to the preset degree value.

• Easily accessible transformer.

• Tube support included.

• Operator panel included.

• Electrical requirements per requisition. All available.

• Adjustable power.

• The output voltage fluctuation is within +/- 1% even if the input power voltage fluctuates +/- 10%. This keeps temperature consistent inside the inductor during the heating process.

• Built-in surge protection.

• Phase locking is employed to track frequency so that inverter operates safely and efficiently.

• Start-up at zero voltage. No amperage draw.

• All parameters are pre-set at factory. No need to recalibrate.

SPECIFICATIONS FOR THE 1220 INDUCTION BENDER

• Max O.D. x Wall (mm) – 1220 x 35

• Min O.D. (mm) – 325

• Maximum Bend Angle: 180 degrees

• CLR

  Range (mm) – 960-6100

  Min (R/D) – 3

• Max Main Cylinder Stroke (M) – 9.6

• Induction Power

  Type (KGPS) – 800

  Power (KW) – 800

  Frequency (KHz) – 0.8 to 1

• Bend Speed (mm/sec) – 0.3 to 3

• Rear Clamp Speed (M/min) – 1.5

• Rear Clamp Back (M/min) – 2

• System Pressure (mpa) – 16

• Machine CL Height (M) – 1.85

• Overall Dimensions (M) – 26 x 9.5 x 3.8

• Machine Weight (tons) – 120

THE 1420 INDUCTION BENDER IS PERFECT FOR BENDING UP TO 56” OD PIPE.

For quality, consistently uniform bends, Induction Benders are your best choice. Induction Benders produce mechanical forming on a wide range of materials and a wide range of O.D. bending, from 4” to 56.”

All Induction Benders are computer controlled.

The 1420 Induction Bender is perfect for:

• Petrochemical

• Thermal or nuclear power plants

• Mining

• Agro-food

• Paper

• Oil and gas (onshore and offshore pipelines)

• Highway billboards

• Structure construction

• Solar companies

If you need a machine or tooling quote just let us know!

STANDARD FEATURES OF THE 1420 INDUCTION BENDER

• All functions electrically and hydraulically controlled.

• Dual Hydraulic Systems.

• Touch screen displays bend degree. Stops the machine when arriving to the preset degree value.

• Easily accessible transformer.

• Tube support included.

• Operator panel included.

• Electrical requirements per requisition. All available.

• Adjustable power.

• The output voltage fluctuation is within +/- 1% even if the input power voltage fluctuates +/- 10%. This keeps temperature consistent inside the inductor during the heating process.

• Built-in surge protection.

• Phase locking is employed to track frequency so that inverter operates safely and efficiently.

• Start-up at zero voltage. No amperage draw.

• All parameters are pre-set at factory. No need to recalibrate.

SPECIFICATIONS FOR THE 1420 INDUCTION BENDER

• Max O.D. x Wall (mm) – 1420 x 35

• Min O.D. (mm) – 426

• Maximum Bend Angle: 180 degrees

• CLR

  Range (mm) – 1200-7100

  Min (R/D) – 3

• Max Main Cylinder Stroke (M) – 10

• Induction Power

  Type (KGPS) – 1000

  Power (KW) – 1000

  Frequency (KHz) – 0.8 to 1

• Bend Speed (mm/sec) – 0.3 to 3

• Rear Clamp Speed (M/min) – 1.5

• Rear Clamp Back (M/min) – 2

• System Pressure (mpa) – 16

• Machine CL Height (M) – 2

• Overall Dimensions (M) – 27 x 11 x 4.2

• Machine Weight (tons) – 135